AGS-2/4 - aerosol fire extinguishing by Ankos 66 Bulgaria. Red Granade.

Description

    AGS-2/4 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.
    Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. Generator is structurally stable to vibration. It has a low temperature of the outgoing aerosol stream due to the cooling unit which is located inside.
    Generator has a lot of modifications by the type of fastening and direction of aerosol stream. The basic modifications are given below.
    The electrical impulse which comes to the starter* which is installed inside generator, ignites the aerosol forming cartridge. During the burning of it the fire extinguishing aerosol is produced. The aerosol flow penetrates the cooling layer and comes out of generator through the nozzle.
    It is recommended for protection of transport and the premises of medium volume.
    The warranty period is 18 months
    Lifetime – 10 years
    Operating life – 5 years

Technical characteristics

Net Weight	4,6 kg
Net Weight of aerosol generating cartridge	1,6 kg
Protected volume	21 m3
Operating time	45 ± 4,5 sec
Overall dimensions
Diameter	167 mm
Height	175 mm
Starter	VR-7.5, VRTH	VEL, VELTH
Starter impedance	7,5 Ohm	2,5 – 4 Ohm
Starter minimum current	1A	0,4 A
Starting voltage	8 – 30 V	1,5 – 24 V
Starting impulse Duration	Not less than 1,5 sec	Not less than 0,1 sec
Delay of generator start up	< 1,5 sec
Operating conditions
Operating conditions	± 50 °С
Humidity	up to 98 %
Mechanical influence at frequency range up to 100 Hz – 1 g	1g

* The starter type is chosen by the Buyer

AGS-2/4	AGS-3	AGS-5	AGS-7	AGS-8
AGS-11/1-3	AGS-11/5	AGS-6	AGS-11/6	AGS-11/4

Aerosol fire fighting
The search of new fire fighting technologies has demanded to use the existing fundamental discoveries and developments in the sphere of volume fire fighting.